NiuBi
Networking
Embedded Linux Boards
NiuBi Personal Cloud 1 (NB-PC1) is a network-attached storage (NAS) device specifically engineered to run free, libre, open source software (FLOSS). NB-PC1 has all the functionality of any commercial, proprietary NAS, but at a much lower cost and with the transparency, reliability, and accessibility advantages that come with using FLOSS.
Whether you’re a developer or a digital artist, chances are you have a lot of essential data, from music tracks to application code. So you probably already know that data loss is a fact of modern life, and backing up your data is the surest way to prevent it. You could use an online service for backups, but doing so exposes you and your data to a wide range of privacy, security, legal, and financial risks beyond your control. For example:
All these questions and more make a strong case for using not only a NAS, but a NAS over which you have complete control - a FLOSS NAS! Enter NiuBi Personal Cloud 1.
NiuBi Personal Cloud 1 can be used for a wide variety of applications, including:
NB-PC1 offers increased information security, easier collaboration, and less administrative mess compared with SaaS solutions and other NAS devices.
There are hundreds of NAS devices out there, but none of them except NiuBi Personal Cloud 1 are designed from the beginning to be open hardware and run FLOSS. The table below shows two of the most comparable NAS devices and how they stack up against the NB-PC1.
TS-431 | DS416slim | NiuBi Personal Cloud 1 | |
---|---|---|---|
Chipset | Freescale ARM Cortex A9 | Marvell Armada 385 | MediaTek MT7621A |
Cores | 2 | 2 | 2 |
Threads | 2 | 2 | 4 |
Speed | 1.2 GHz | 1.0 GHz | 880 MHz (overclocked to 1.2 GHz) |
Memory | 512 MB DDR3 | 512 MB DDR3 | 512 MB DDR3 |
Drive Bays | 4 x 2.5" or 3.5" | 4 x 2.5" up to 12.5 mm drive height | 6 x 2.5" up to 15 mm drive height |
Idle Power | 14.84 W | 11.63 W | 11.64 W |
Openness | partial software | partial software | hardware schematics + all software |
The minimal enclosure design is a major factor in making NiuBi Personal Cloud 1 small, inexpensive, and energy efficient. Though we love the aesthetic of the enclosure, keep in mind the universal truth about NAS devices: they are best placed near your wireless router and viewed from the command line or web interface.
The fact the mainboard isn’t fully enclosed allows for better airflow and fanless operation (though the mainboard can accommodate a small fan if you want to add one). No fan means much less build up of dirt and dust - few things compare to the inside of a fan-cooled PC that hasn’t been opened in years, whereas we’ve never seen a dirty free-standing printed circuit board assembly.
In addition to the enclosure’s great airflow, its anodized aluminum side plates help dissipate heat away from the mainboard.
NB-PC1 is compatible with 2.5" drives, which means it has a small physical footprint and can work with a wide variety of SSDs in addition to the usual array of HDDs. NB-PC1 is not compatible with 3.5" drives, but a future version might be.
NiuBi Personal Cloud 1 is 100% free of binary blobs. Check out this campaign update to see some of the backstory of how this is possible.
NiuBi Personal Cloud 1 can run several popular FLOSS suites for managing routers, NAS devices, or just general computing. These are some of the main suites the NB-PC1 can run:
Yep, the NB-PC1 can run Debian.
The openmediavault project is a Debian-based network-attached storage solution designed for home and small office user who lack deep technical experience or knowledge of setting up and and administering an NAS.
Billed as "the libre embedded GNU/Linux distro," libreCMC is a fork of OpenWrt that uses only libre components. Recently, our pull request for NB-PC1 compatibility was merged into the staging branch.
The Linux Embedded Development Environment (LEDE) project is a reboot of the OpenWrt community. We’ve created a NB-PC1 fork of the LEDE project and plan on submitting a patch back to the main project once production of the NB-PC1 is underway. (It is unlikely the LEDE developers would accept a patch for a device not yet in production.)
Produced by NiuBi in Shenzhen, China & Tulsa, OK.
Sold and shipped by Crowd Supply.
One fully populated and assembled NB-PC1 Bare PCB, two anodized aluminum side plates, six threaded brackets and bracket screws, and 24 drive mount screws. Power supply, microSD card, and drives not included. Requires screwdriver for assembly.
An energy efficient (level V) global input power supply that puts out up to 3 A at 12 VDC through a 5.5 mm x 2.1 mm center-positive barrel jack. Perfect for powering your NiuBi Personal Cloud 1.
A 2 GB microSD card imaged with Debian. Run your NiuBi Personal Cloud 1 directly from the microSD card. Copying Debian to an SSD or HDD is recommended, but this microSD card will get you started.
Debugging made easy! This USB-to-UART adapter comes equipped with a 3.5 mm plug to connect to NiuBi Personal Cloud 1. This debugging method is ubiquitous in the world of embedded systems.
Classic NES games on open source hardware that fits in the palm of your hand
An open source FT2232H-based, multi-protocol, multi-voltage tool for hardware hacking
A fully open source dual-channel SDR Raspberry Pi HAT with a tuning range up to 6 GHz